Your K3 Integrated Amplifier is an integral part of your Hi-Fi system. Its correct installation, set-up and operation will have a significant influence on the performance of the entire Hi-Fi installation.
A C M A I N S S U P P L Y Your K3 Integrated Amplifier is set to operate from a fixed supply voltage which is marked on a label next to the mains input socket. Before connecting the mains lead...
The top surface of the unit will get hot in operation. Do not leave items on the top surface and avoid contact with the top of the unit. A warning label is affixed to the top surface. K3 Integrated Amplifier...
F R O N T P A N E L V I E W 4 5 6 AC Mains Power Switch Input Button (forward) Mode Indicator Volume Control Input Indicators Bluetooth On/ Off Button Mode Button Headphone Socket (3.5mm) Input Button (back) R E A R P A N E L V I E W 1 2 3 4 Pre-Amplifier Output...
BT: Select the Bluetooth input INPUT : Scroll through inputs to the left INPUT INPUT : Scroll through inputs to the right OK: No function for K3 products MUTE MUTE: Reduces the volume by -20dB VOLUME : Adjusts the volume down VOLUME...
The AV Input is like any of the other RCA inputs and should be connected to the source (TV, STB, etc) so that the K3 Integrated Amplifier is used as the volume control. The Bypass Input should be connected to your AV amplifier’s left and right pre-amplifier outputs.
(-) amplifier terminal and the red (+) loudspeaker terminal/ cable is connected to the red (+) amplifier terminal. When both left and right loudspeaker outputs are connected to their respective loudspeakers the amplifier is ready for use. K3 Integrated Amplifier...
Bi-amping adds an additional amplifier (eg. K3 Power Amplifier) to the system so that the one amplifier drives the low frequencies - normally the power amplifier - and the other amplifier drives the high frequencies.
Connect the cables as illustrated below. Positive Loudspeaker Cable Negative Loudspeaker Cable NOTE: Remove bi-wire links from between the loudspeaker terminals K3 Integrated Amplifier...
Bi-amping is similar to bi-wiring, but uses an additional amplifier (K3 Power Amplifier) to drive the low frequency terminals. One set of cables goes from the K3 Integrated Amplifier to the high frequency terminals on the loudspeaker and the power amplifier drives the low frequency terminals.
Pressing the Backward Button repeatedly reverses the sequence. Whenever an input is selected the appropriate indicator LED will illuminate. NOTE: To select the Bluetooth input, press the Bluetooth On/ Off button. The Bluetooth LED will flash when selected. K3 Integrated Amplifier...
Start playing from your chosen source (CD, DAC, Turntable, etc) and increase the volume slowly If connected to the K3 Power Amplifier, the LED indicators on the power amplifier will automatically switch to red and will be activated within a few seconds.
Roksan dealer. W A R R A N T Y There are no user-serviceable parts inside your K3 Integrated Amplifier. If a fault should develop, refer any servicing to your appointed Roksan dealer, distributor or Roksan approved service agent.
T R O U B L E S H O O T I N G If you suspect that your amplifier is not operating properly, you should check all the connections carefully. Pay particular attention to loudspeaker phasing and channel connections.
Maximum Power Consumption: <800 W (8 Ω, both channels driven) Rated Power Consumption: 800W Dimensions (W x D x H): 432 x 380 x 90 mm 432 x 380 x 102 mm (including feet) Weight: 12 Kg All specifications are liable to change without notice. E&OE K3 Integrated Amplifier...
Page 20
Designed and built in Great Britain. Roksan roksan.com 24 Brook Road, info@roksan.com Rayleigh, Essex Version 3.1. 2019 SS6 7XJ, UK ROK-1217 +44 (0)1268 798900...