Switching On; The Mode Button; Volume Control - Roksan Audio Caspian Set Up Manual And Product Manual

S W I T C H I N G O N
The power switch is on the left front underside of the amplifier. This switch is the only
method of controlling the power to the amplifier.
When switched to 'on' the amplifier runs a self-diagnosis. This is a quick process where
the Mode LED indicator will momentarily be green. When completed, the LED will turn
red and the amplifier is now ready for use.
U S I N G T H E F R O N T P A N E L C O N T R O L S

The Mode Button

The Mode button on the front panel of the amplifier has the following functions:
• Pressing the Mode button once with the amplifier activated will attenuate the
volume level by 20 dB and the indicator LED will glow orange. The amplifier remains
fully functional in this mode.
• A second press returns the amplifier to the unattenuated level and the indicator LED
will revert to red.
Input Selector
The Input Selector is an endless rotary switch that moves round one click at a time.
It connects each signal source to the amplifier by rotating through the inputs with the
exception of Tape. Rotating the Selector continuously clockwise will select inputs in this
sequence:
CD
Whenever an input is selected the appropriate indicator LED illuminates red.
When you select an input source, that input is connected to the Tape Output of the
amplifier thus enabling you to record.
In multi-room installations or where the front display is not seen, direct input access for
CD, Tuner, Video, Line1 & Line2 can be achieved by programming direct access codes
(For assistance contact Roksan).

Volume Control

The Volume Control is a precision device. It follows a logarithmic law so that its
response approximates that of the human ear. There is an illuminated indicator on the
Volume Control to clearly show the appropriate volume setting. The level increases in a
clockwise direction.
10
TUNER VIDEO
roksan.com
LINE1 LINE2