Roksan Audio K3 User Manual page 10

!
IMPORTANT NOTE: For optimum performance it is recommended to use
high quality inter-connect cable such as ROKSAN HDC-03A High Definition
Analogue Cable.
IMPORTANT NOTE: For optimum performance it is recommended to use
high quality cable such as ROKSAN HDC 03S High Definition Loudspeaker
Cable. Many speaker cables such as the ROKSAN HDC-03S are directional.
Please observe this characteristic. DO NOT use a speaker cable with
conductor size less than 16 AWG (1.6mm Diameter). The binding posts
accept conductor sizes up to 12 AWG.
!
If the system loudspeakers utilise more than one drive unit with individual
input terminals, for example a Tweeter and Woofer, then the loudspeakers
performance should benefit from bi-amping by use of the addition of a K3
Power Amplifier. Dedicating one amplifier to the Tweeter and another to the
Woofer isolates them from each other, hence reducing distortion and
increasing reserved power. Speakers work significantly better with most
amplifiers when multi-amped than using one, more powerful, amplifier.
For setup and connection details on multi-amping refer to the K3 Power
Amplifier Manual.
!
NOTE: Multi-Wiring connects the Woofer and the Tweeter terminals directly
to the output terminals of the amplifier and is the first step towards Multi-
Amping.
!
!
!
!
!
!
Page 10
!
!
!
Multi-amping Loudspeakers
!
Multi-wiring Loudspeakers
Roksan Audio Ltd
CLASSIFICATION: General Use
All specifications are liable to change without notice. E&OE