Table of Contents
Advertisement
S W I T C H I N G O N
The power switch is on the left front underside of the amplifier. This switch is the only
method of controlling the power to the amplifier.
When switched to 'on' the amplifier runs a self-diagnosis. The Mode Indicator LED
will change to Red and the last selected input will be selected. The amplifier will then
automatically check its input/ output status and after a brief moment, when no problems
are detected, the loudspeaker output relays will click on and the amplifier starts in
normal operation mode and is ready to use responding to all front panel buttons and
the remote control.
U S I N G T H E F R O N T P A N E L C O N T R O L S
Volume Control
The Volume Control is a precision device. It follows a logarithmic law so that its
response approximates that of the human ear. There is an indicator on the Volume
Control to clearly show the appropriate volume setting. The level increases in a
clockwise direction.
The Mode Button
The Mode button on the front panel of the amplifier has the following functions:
•
Pressing the Mode button once with the amplifier activated will attenuate the
volume level by 20 dB and the indicator LED will glow ORANGE. The amplifier
remains fully functional in this mode.
•
A second press returns the amplifier to the unattenuated level and the indicator LED
will revert to red.
Input Selector Buttons
The Input Selector Buttons scroll through the inputs one click at a time. They connect
each signal source to the amplifier by shifting through the Inputs. Pressing the Forward
Button repeatedly will select inputs in this sequence:
CD
TUNER
Pressing the Backward Button repeatedly reverses the sequence. Whenever an input is
selected the appropriate indicator LED will illuminate.
NOTE: To select the Bluetooth input, press the Bluetooth On/ Off button. The
Bluetooth LED will flash when selected.
AV
Line 1
K3 Integrated Amplifier
Line 2
PHONO
11
Advertisement
Table of Contents
