Front Panel Control - Roksan Audio Blak Manual

blak Integrated Amplifier
Manual
VOLUME CONTROL
The volume control on the blak is a precision device. It follows algorithmic law so that its
response approximates that of the human ear. The series of LEDs around the volume control
indicates the volume level. When the volume control is at 0, the output is automatically
muted. Turning the volume knob will take the unit out of mute mode.
The volume can also be muted by pressing the MUTE button on the R7 remote control. When
unmuted, the volume will return to it's previous level.

FRONT PANEL CONTROL

The INPUT Selector Buttons (4) and (5) shift through a list of the inputs one click at a time.
Pressing OK will confirm the selection, otherwise the unit will revert to the current selection.
The blak Integrated Amplifier has an input selection memory. When switched on, it will
automatically recognise the previous input selection. The selected input will show in the LED
display window.
Pressing the OK button twice in quick succession will take the unit into standby. Pressing it
once will bring the unit out of standby.
BLUETOOTH CONNECTION AND PAIRING
Make sure your device's Bluetooth is enabled and select the Bluetooth input on the
amplifier. This will select the Bluetooth source and the characters 'BT' will flash continuously
on the display. When your device has found the amplifier, 'Roksan blak' will appear on your
device. Next, connect to pair your device. When paired or connected 'BT' will stop
flashing and remain on. You are now ready to stream music to the blak from the paired
device. If your device is aptX compatible and contains high resolution audio files, then these
will be streamed in the original high quality bit rate through the blak amplifier.
Whilst streaming Bluetooth data, if you wish to revert to another input, simply use the input
selectors to the desired choice and press OK as normal. You will then have to re-connect the
device but pairing is not necessary.
USING THE INTERNAL DAC AND CONNECTING TO THE USB PORT
(USB VERSION ONLY)
The USB input can be used with a Windows or Mac operating system computer using a USB
B-type connector cable. Select the USB input using the input selection buttons and press 'OK'.
NOTE: It's always recommended to use a directly connected USB socket. For example, front
panel USB connections on desktop pcs often have a substandard internal wiring that can
cause degradation to the USB signal.
Roksan Audio Ltd
CLASSIFICATION: General Use
All specifications are liable to change without notice. E&OE
ROKSAN AUDIO
Roksan Audio Ltd, Jubilee Close, Townsend Lane, London, NW9 8TR, United Kingdom
Website: www.roksan.co.uk | email: info@roksan.co.uk
Tel: +44 (0)20 8900 6801 | Fax: +44 (0)20 8205 2644
Registered in England | Number: 3089229 | VAT Number: 719 3079 23 | Director: T Hashemi
1 0