Moon Phase Model 708; Setting The Moon Phase - SHINOLA 5021.D Operation Manual & Warranty Book

MOON PHASE MODEL 708

SETTING THE TIME
1 Pull out the crown to position
(the watch stops).
2 Turn the crown until you reach the
correct time.
Push the crown back into position I.
3
SETTING THE DATE
1 Pull out the crown to position
(the watch continues to run).
2 Turn the crown until the correct date appears.
Push the crown back to position I.
3

SETTING THE MOON PHASE

1 Pull out the crown to position
(the watch stops).
Turn the crown until you reach the correct moon
2
position. Be sure to match the position to accurate
moon phase (use a lunar calendar). The moon disc
moves very slowly by incrementally jumping every
24 hours (each date change).
As time function rotates on position III, the hands
3
will move while setting moon phase. Once accurate
moon phase is achieved, set the hour and minute
hands back to the correct time.
4 Be sure to reset the date indicator to correct date
(refer to SETTING THE DATE instructions above).
III
II
III
19
1
I II III
2
708
3
1
I II
2
708
3
1
I II III
3
2
708
4