Adjusting The Chronograph Hands To Zero; Basic Function (Start / Stop / Reset) - SHINOLA 5021.D Operation Manual & Warranty Book

ADJUSTING THE CHRONOGRAPH HANDS TO ZERO

Pull crown out to position III.
1
(All two chronograph hands are in
their correct or incorrect zero position.)
2 Keep push-buttons
simultaneously for at least 2 seconds.
(The center stop-second rotates by 360°
- corrective mode is activated.)
3 Press push-button A
center stop-second hand. Press and
hold push-button A
stop-second hand quickly.
push-button to advance to the next hand.
B
Press push-button
4 A
minute counter hand. Press and
hold push-button A
minute counter hand quickly.
Return the crown to position I.
5

BASIC FUNCTION (START / STOP / RESET)

Example
1 Start: press push-button A.
2 Stop: to stop the timing, press push-button
once more and read the two chronograph
counters: 20min / 10sec.
3 Zero positioning: Press push-button B.
(The two chronograph hands will
be reset to their zero positions.)
A and B depressed
to single step the
to advance the center
3b Press
to single step the
to advance the
A
8
4
3
2
A
1
I II III
5
B
2
3b
2
1
A
B
3