Chronograph Model 3540.D - SHINOLA 5021.D Operation Manual & Warranty Book

CHRONOGRAPH MODEL 3540.D

DESCRIPTION OF THE DISPLAY AND CONTROL BUTTONS
Please note:
Before using the chronograph functions,
please ensure that:
- the crown is in position
(= normal position).
- the three chronograph hands are
precisely at zero position following
activation of push-button B. If the
hands are not precisely at zero,
their positions must be adjusted.
(See the chapter Adjusting the
Chronograph Hands to Zero .)
SETTING THE TIME
Pull out the crown to position III.
1
(The watch stops.)
2 Turn the crown until you reach the
correct time.
Push the crown back into position I.
3
SETTING THE DATE
Pull out the crown to position II.
1
(The watch continues to run.)
2 Turn the crown anticlockwise until
the correct date appears.
Push the crown back into position I.
3
Center stop-second
I
1 /
Second counter
10
(Becomes an hour
counter after 30 minutes)
Hour hand
Minute counter
Second hand
16
Minute hand
A
I
B
Date
1
I II III
2
3
1
I II
2
3