SHINOLA 5021.D Operation Manual & Warranty Book page 16

ADJUSTING THE CHRONOGRAPH HANDS TO ZERO
Pull crown out to position III.
1 1
(All four chronograph hands are in
their correct or incorrect zero position.)
2 2 Keep push-buttons
simultaneously for at least 2 seconds.
(The center stop-second rotates by
360° - corrective mode is activated.)
3 3 Press push-button A
center stop-second hand. Press and
hold push-button
A
stop-second hand quickly.
push-button B to advance to the next hand.
Press push-button
4 A
Press and hold push-button
4b
Press push-button
5 Press push-button
A
Press and hold push-button
4b
quickly. Press push-button
Return the crown to position I.
6
BASIC FUNCTION (START / STOP / RESET)
Example
1 Start: Press push-button A.
2 Stop: to stop the timing, press push-button A.
once more and read the four chronograph
counters: 4 hr. / 20 min. / 5 sec. / 7⁄10 sec.
3 Zero positioning: Press push-button B.
(The four chronograph hands will
be reset to their zero positions.)
A and B depressed
to single step the
to advance the center
3b Press
to single step the 1/10 second counter hand.
to advance the 1/10 second hand quickly.
A
B to advance to the next hand.
to single step the minute and the hour counter hands.
A to advance the minute and hour counter hands
B to advance to the next hand.
14
5
4
3
2
A
1
I II III
6
B
2
3b
4b
2
1
1
A
B
3