Table of Contents
Advertisement
Locomotive basics
Assigning your locomotive a new ID#
F
or operation in the Command Control environment, you will want to give your LionChief Plus
2.0 locomotive a unique ID#. Your locomotive will respond to commands associated with its
ID# while all other units will disregard these commands. This procedure is not necessary for
conventional (non-Command) or BlueTooth operation.
1. Slide the program run switch on your locomotive to the PROG position. See Figure 6
on page 8.
2. Place the locomotive on the track.
3. Connect the Command Base and plug it in.
4. Power up the track.
5. Press ENG on the CAB-1 or CAB-2 remote.
6. Enter the unique ID#. Choose any number from 1 to 98 that has not been assigned
to another locomotive (ENG). We recommend using a part of your locomotive's road
number.
Note!
All Command Control enabled locomotives respond to ENG 99. We recommend that you
reserve ID# 99 as a "universal" ID#.
7. Press SET. The locomotive's horn will sound, or the headlights will flash if the
RailSounds sound system is off.
8. Slide the program run switch back to the RUN position.
The LionChief Plus 2.0 locomotive ID# has been set. Be sure to record the new ID# for your
reference.
9
Advertisement
Table of Contents
