Valve Spring Installation; Retainer Lock Installation; Cylinder Head Bolt Installation - Mitsubishi 4G9 User Manual

Painted
end
Except
MIVEC
MIVEC
MD998772
MD998735
Shank length
E
Mitsubishi Motors Corporation
4G9 ENGINE (E - W) -
"BA VALVE SPRING INSTALLATION
Spring
(1) Install the valve spring with the painted end on the rocker
retainer
Stem seal
Spring seat
"CA RETAINER LOCK INSTALLATION
(1) The valve spring, if excessively compressed, causes the
MD998772
MD998784
"DA CYLINDER HEAD BOLT INSTALLATION
(1) When installing the cylinder head bolts, check that the
(2) Install the washers as illustrated.
(3) Apply engine oil to the bolt threads and washers.
Nov. 1995
Cylinder Head and Valves
arm side.
bottom end of retainer to be in contact with the stem
seal, and damage it.
shank length of each bolt meets the limit. If the limit
is exceeded, replace the bolts.
Limit: Max. 96.4 mm
PWEE9502-A
11A-9-7
Revised