Mitsubishi 4G9 User Manual page 114

4g9 series
Hide thumbs Also See for 4G9:
Table of Contents

Advertisement

4G9 ENGINE (E - W) -
Wire or MD998442
Wire or MD998442
Diesel fuel
Diesel fuel
Wire or MD998442
E
E
Mitsubishi Motors Corporation
Mitsubishi Motors Corporation
(2) Place the lash adjuster in container A and clean its outside
Diesel fuel
(3) While gently pushing down the internal steel ball using
Diesel fuel
(4) Remove the lash adjuster from the container. Then, push
(5) Place the lash adjuster in container B. Then, gently push
May 1995
May 2000
Rocker Arms and Camshafts
surface.
NOTE
Use a nylon brush if deposits are hard to remove.
special tool MD998442, move the plunger through 5 to
10 strokes until it slides smoothly. In addition to eliminating
stiffness in the plunger, this operation will remove dirty
oil.
Caution
The steel ball spring is extremely weak, so the lash
adjuster's functionality may be lost if the air bleed
wire is pushed in hard.
NOTE
If the plunger remains stiff or the mechanism appears
otherwise abnormal, replace the lash adjuster.
down the steel ball gently and push the plunger to eliminate
diesel fuel from the pressure chamber.
down the internal steel ball using special tool MD998442
and move the plunger through 5 to 10 strokes until it
slides smoothly. This operation will clean the lash
adjuster's pressure chamber.
Caution
The steel ball spring is extremely weak, so the lash
adjuster's functionality may be lost if the air bleed
wire is pushed in hard.
PWEE9502
PWEE9502-G
11A-8-11
Revised

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents