Engine Coolant Temperature Gauge Unit Installation; Engine Coolant Temperature Sensor Installation; Water By-Pass Fitting Installation - Mitsubishi 4G9 User Manual

11A-7-6
4G9 ENGINE (E–W) –
<REAR WHEEL DRIVE>
E
E
Mitsubishi Motors Corporation
Mitsubishi Motors Corporation
"FA ENGINE COOLANT TEMPERATURE GAUGE UNIT
(1) Apply the specified sealant to the threads.
"GA ENGINE COOLANT TEMPERATURE SENSOR
(1) When reusing the sensor, apply the specified sealant
"HA WATER BY-PASS FITTING INSTALLATION
(1) Apply 3 mm diameter of Form-In-Place Gasket (FIPG)
"IA WATER FITTING INSTALLATION
(1) Apply 3 mm diameter of Form-In-Place Gasket (FIPG)
May 1995
Jun. 2002
Water Pump and Water Hose
INSTALLATION
Specified sealant:
3M ATD Part No.8660 or equivalent
INSTALLATION
to the threads.
Specified sealant:
3M Nut Locking Part No.4171 or equivalent
to the location shown in the illustration.
Specified sealant:
Mitsubishi Genuine
equivalent.
to the location shown in the illustration.
Specified sealant:
Mitsubishi Genuine
equivalent.
PWEE9502
PWEE9502-K
Part No.MD970389
Part No.MD970389
Added
or
or