1. Adjust the remote camera position via the PTZ navigation panel;
2. Click on
to add a new preset;
3. Enter the preset name in the input box or just use the default name;
4. Click the check button
name;
5. Double click one preset with mouse (or press the OK button on the front panel, or press the OK button
on the remote control) to activate it;
Users could click
NOTE
:
GVR3550/GVR3552 User Manual
Figure 21 PTZ Control Page—Preset
to save the preset, or click
below the control panel to delete the preset.
Grandstream protocol does not support preset setting..
on the right side of the preset to edit
Page 41 of 121