Table 42 Remote Preview Camera Specifications - Grandstream Networks GVR3552 User Manual

Icon Name
Closed Record
Manual
Record
Capture
Mute/Unmute
Start/Stop
Intercom
PTZ Control
Switch to Full
Screen
Insta
nt
Playback
Image Config
Close Preview

Table 42 Remote Preview Camera Specifications

Name
Camera
Stream
Recording
Status
GVR3550/GVR3552 User Manual
The camera is not recording now.
The camera is in manual record mode. The default path:
C:\GVR_Record
Capture preview screen. Users could save the snapshots under
C:\GVR_Capture directory on PC.
When the volume in on, if the remote camera is installed with audio input
device, users could listen in to the remote party.
When the intercom is on, if the remote camera is installed with audio
output device, users could speak to the remote camera via local audio
input device.
Click to enable PTZ control to configure PTZ preset, patrol and pattern.
Switch the current screen to full screen or double click to enter full
screen mode, double click again to exit full screen.
Playback video in preset time. It will prompt "The selected camera has
no video "if has no existing video. Users could set the preset time in
Basic System Settings chapter.
Enter the corresponding page to adjust the current window image.
Close preview window.
Click right mouse to enter the stream settings page to set primary
stream or secondary stream.
Display the current camera recording status (being recorded or not).
The video file is saved on PC.
Explanation
Explanation
Page 104 of 121