Schedule; Table 24 Encoding Config Parameters Explanation - Grandstream Networks GVR3552 User Manual

Table 24 Encoding Config Parameters Explanation

Parameter
Camera Selection
Camera Name
Display Time
Display Camera
Name
Position
Audio Recording
Primary Stream
Secondary Stream
Video Codec
Resolution
Bit Rate Control
Image Quality
Bit Rate (kpbs）
Frame Rate (fps)
I - frame Interval

SCHEDULE

SCHEDULE CONFIG
Users could add new schedule and manage schedule record and alarm event of each camera. Users could add
up to 16 schedules, see figure 42.
GVR3550/GVR3552 User Manual
Select camera. Once selected, it will display the camera's IP and model.
Display camera name on preview screen.
Defines whether to display time on preview screen.
Defines whether to display camera time on preview screen.
Displaying camera's name and time on Top-Left or Bottom-Left on preview screen.
Defines whether to record audio when recording.
Configure parameters.
Configure parameters.
Select the Codec the camera supports. Beta version just supports H.264.
Configure the resolution for each camera. Supports no more than 1920*1080P.
When set to CBR, the image quality is inalterable; If set to VBR, configure the image
quality based on the range the camera provides.
When the bite rate is set to VBR, configure the image quality based on the range the
camera provides.
Set the bite rate to change image quality, greater bit rate brings better image quality.
The range is 256~8192Kbps.
The range is1~30fps or auto.
The range is 1~100s.
Explanation
Page 59 of 121