Basic Preview Operation; Figure 17 Abnormal Alarm Prompt; Figure 18 Basic Preview Operations; Table 13 Abnormal Alarm Explanation - Grandstream Networks GVR3552 User Manual

A dialog box will pop up in the center page to prompt the users if there is an abnormal alarm or local I/O
alarm (go to Settings page to set first), as shown in figure 16.
Alarm prompt can be minimized to the lower right corner of the page; you can click
details. If there always been alarm triggers, the prompt will pop up in the center of the page every 5 minutes.

Table 13 Abnormal Alarm Explanation

Icon Name
Disconnection
Alarm
HDD Empty
Alarm
HDD Error Alarm
HDD Full Alarm
IP Conflict Alarm
Local I/O Alarm

BASIC PREVIEW OPERATION

If need to make basic operations to one specified camera, users could access the preview page and click left
mouse to bring up the menu bar as shown in Figure 17. Click the buttons on the menu bar to make
corresponding operations.

Table 14 Basic Preview Operations Explanation

Icon Name
Close
Recording
Auto
Recording
GVR3550/GVR3552 User Manual

Figure 17 Abnormal Alarm Prompt

Alarm when the network is disconnected.
Alarm when no HDD detected.
Alarm when HDD is abnormal.
Alarm when HDD is full.
Alarm when detecting the IP address of another device is in conflict
with the GVR in the network.
Alarm when detecting I/O alarm on GVR3550.

Figure 18 Basic Preview Operations

The camera is not recording now.
The camera is in schedule record mode.
Explanation
Explanation
to view the alarm
Page 37 of 121