Figure 42 Encoding Config Page; Table 23 Camera Alarm Parameters Explanation - Grandstream Networks GVR3552 User Manual

Alarm Action

Table 23 Camera Alarm Parameters Explanation

Parameter
Screen Prompt
Beep
HDMI Alarm
Send Email
Recording Camera
Record Delay (s)
Alarm Output
Alarm Delay (s)
Copy to Other Camera
ENCODING CONFIG
Encoding Config page is as shown in figure 41.
GVR3550/GVR3552 User Manual
Send Mail, Alarm Output, Alarm Delay (s), or copy the alarm to other cameras.
Set different alarm mode.
Display prompt on screen when alarm.
Beep when alarm.
Alarm If the GVR is connected to an HDMI display device.
Send email to one mailbox when alarm. Go to Settings ->System Settings ->
Email Settings to set.
Select camera to record when alarm.
When the alarm end, the alarm recording will last for a period of time before stops,
the range is 10~180 seconds.
The alarm output interface when alarm.
When the alarm end, the alarm output will last for a period of time before stops,
the range is 1~600 seconds.
Copy the alarm parameters of one camera to other cameras.

Figure 42 Encoding Config Page

Explanation
Page 58 of 121