Table 20 Dvs Parameters Setting Explanation - Grandstream Networks GVR3552 User Manual

Parameter
Camera
Protocol
Protocol (IP)
IP Address
Port
Username
Password
NOTE
:

Table 20 DVS Parameters Setting Explanation

Parameter
IP Address
Username
Password
Analog Interface
Count
RECORD MODE CONFIG
Record Mode Configuration page is as shown in figure 36, users could click one camera to set Close Record,
All Day Record and Schedule Record.
GVR3550/GVR3552 User Manual
Select camera. You cannot select the existing camera.
Supports Grandstream series cameras and cameras compatible with ONVIF
protocol.
Set the protocol to TCP or UDP.
Set the IP address of the remote IP camera.
Set the port number of the remote IP camera. The default is "80".
Set the username to connect the remote IP camera. The default is "admin".
Set the password to connect the remote IP camera. The default is "admin".
When trying to connect to the remote IP camera, the username and password

the GVR3550/GVR3552 use are both default, if not, the connection may fail.
Please manual modify the remote IP camera username and password.
Set the IP address of the DVS device.
Set the username to connect the DVS device. The default is "admin".
Set the password to connect the DVS device. The default is "admin".
Configures DVS analog interface count. You could see the list of interfaces if there
exist more than one interface.
Explanation
Explanation
Page 55 of 121