Go to Maintenance->Troubleshooting-> Debug Log to set debug parameters.
Table 43 Debug Log Parameters Explanation
Parameter
Debug Log Server
Debug Log Level
GVR3550/GVR3552 User Manual
Figure 93 Web Page—Maintenance Menu
Figure 94 Web Page—Debug Log
The IP address or URL of the debug log server.
Selects the log level. The default setting "None" means sending no log. The log
priority from high to low is Debug, Info, Warning and Error.
Debug Log based on the following events:
The product model/version (INFO level)
NAT Info (INFO level)
Registration state changes (INFO level)
Negotiation coding (INFO level)
Ethernet connection (INFO level)
SLIC debris abnormal (WARNING and ERROR level)
Abnormal memory (ERROR level)
Explanation
Page 107 of 121