1. Adjust the remote camera position via the PTZ navigation panel;
2. Click on
3. Enter the preset name in the input box or just use the default name;
4. Click the check button
name;
5. Double click one preset with mouse (or press the OK button on the front panel, or press the OK button
on the remote control) to activate it;
Users could click
NOTE
GVR3550/GVR3552 User Manual
VoIPon www.voipon.co.uk sales@voipon.co.uk Tel: +44 (0)1245 808195 Fax: +44 (0)1245 808299
Figure 21 PTZ Control Page—Preset
to add a new preset;
to save the preset, or click
below the control panel to delete the preset.
:
Grandstream protocol does not support preset setting..
on the right side of the preset to edit
Page 41 of 121