Figure 53 Network Settings-Basic Settings Page; Table 27 Basic Network Parameters Explanation - Grandstream Networks GVR3552 User Manual

BASIC SETTINGS
Basic Settings page is shown in figure 52, users can choose to obtain IPv4 address automatically or manual
set static IP address or use PPPoE. GVR3550 is available only when network setup is correct.

Table 27 Basic Network Parameters Explanation

Parameter
DHCP
Static IP
IP Address
Subnet Mask
Gateway
MTU (Byte)
DNS Server 1
GVR3550/GVR3552 User Manual
Figure 53 Network Settings—Basic Settings Page
Obtain IPV4 address from the DHCP server automatically.
Set static network parameters.
Manual enter the IPV4 address.
Manual enter the IPV4 subnet mask.
Manual enter the IPV4 default gateway address.
Enter MTU (Maximum Transmission Unit), the maximum data package that can be
transmitted on the network. If the GVR MTU is greater than the one of the gateway,
the lager one will be split for transmission. Please confirm the MTU value of your
gateway before set.
Manual enter the DNS server 1 address.
Explanation
Page 69 of 121