Table of Contents
Advertisement
WEBVIEWER*
S E T U P > A D VA N C E D C O N F I G U R AT I O N > B A S I C E V E N T >
M O T I O N D E T E C T I O N
M o t i o n d e t e c t i o n d e t e c t s t h e m o v i n g o b j e c t s i n t h e c o n f i g u r e d s u r v e i l l a n c e
a r e a , a n d a s e r i e s o f a c t i o n s c a n b e t a k e n w h e n t h e a l a r m i s t r i g g e r e d .
Expert mode: use the expert mode to configure the sensitivity and proportion of object on area of each
area for different day/night switch.
• Day/Night Scheduled-Switch
1. Draw the detection area as in the normal configuration mode. Up to 8 areas are supported.
2. Select Scheduled-Switch for
Switch Day and Night Settings.
3. Select the start and end time for
the switch timing.
4. Select the area by clicking the area
number.
5. Slide the cursor to adjust the
sensitivity and proportion of object on
the area for the selected area in
daytime.
6. Slide the cursor to adjust the
sensitivity and proportion of object on
the area for the selected area at night.
7. Click Save to save the settings.
4 3
Advertisement
Table of Contents
