Table of Contents
Advertisement
WEBVIEWER*
S E T U P > A D VA N C E D C O N F I G U R AT I O N > B A S I C E V E N T >
M O T I O N D E T E C T I O N
M o t i o n d e t e c t i o n d e t e c t s t h e m o v i n g o b j e c t s i n t h e c o n f i g u r e d s u r v e i l l a n c e
a r e a , a n d a s e r i e s o f a c t i o n s c a n b e t a k e n w h e n t h e a l a r m i s t r i g g e r e d .
Expert mode: use the expert mode to configure the sensitivity and proportion of object on area of each
area for different day/night switch.
• Day/Night Auto-Switch
1. Draw the detection area as in the normal configuration mode. Up to 8 areas are supported.
2. Select Auto-Switch for Switch Day
and Night Settings.
3. Select the area by clicking the area
number.
4. Slide the cursor to adjust the
sensitivity and proportion of object on
the area for the selected area in the
daytime.
5. Slide the cursor to adjust the
sensitivity and proportion of object on
the area for the selected area at night.
6. Click Save to save the settings.
4 2
Advertisement
Table of Contents
