Table of Contents
Advertisement
WEBVIEWER*
S E T U P > A D VA N C E D C O N F I G U R AT I O N > B A S I C E V E N T >
M O T I O N D E T E C T I O N
M o t i o n d e t e c t i o n d e t e c t s t h e m o v i n g o b j e c t s i n t h e c o n f i g u r e d s u r v e i l l a n c e
a r e a , a n d a s e r i e s o f a c t i o n s c a n b e t a k e n w h e n t h e a l a r m i s t r i g g e r e d .
Expert mode: use the expert mode to configure the sensitivity and proportion of object on area of each
area for different day/night switch.
• Day/Night Switch OFF
1. Draw the detection area as in the normal configuration mode. Up to 8 areas are supported.
2. Select OFF for Switch Day and
Night Settings.
3. Select the area by clicking the area
number.
4. Slide the cursor to adjust the
sensitivity and proportion of object
on the area for the selected area.
5 . Click Save to save the settings.
4 1
Advertisement
Table of Contents
