Table of Contents
Advertisement
WEBVIEWER*
S E T U P > B A S I C C O N F I G U R AT I O N > S Y S T E M >
M A I N T E N A N C E
U s e t h i s m e n u o p t i o n t o r e b o o t t h e c a m e r a , r e s e t a n d u p d a t e f i r m w a r e .
The maintenance menu tab allows you to conveniently reboot the camera, reset the settings and
update the camera's firmware.
• Reboot: power cycle the camera. Please note. If the camera's network settings are set to DHCP, the
camera's IP address may change after boot up.
• Restore: All settings except for the network and user information will be reset to its factory default.
• Default: All settings, including the network and user settings will be reset.
• Firmware Update: To update the camera's firmware:
1. Select firmware or firmware directory to locate the upgrade file.
a. Firmware: Locate the exact path of the upgrade file.
b. Firmware Directory: Only the directory the upgrade file belongs to is required.
2. Click the 'Browse' button and select the firmware file and press the 'Upgrade' button.
Please note that the upgrade may
take up to ten (10) minutes. Do not
disconnect the camera's power
supply during the upgrade process.
Once the firmware upgrade is
complete, the camera will reboot.
2 4
Advertisement
Table of Contents
