HomeMatic HM-RC-12 Operating Manual page 31

A diffuser sheet is already mounted on it and ensures even illumi-
nation and should therefore not be removed.
Numerous labels for various applications are provided on the
enclosed sheet.
Choose the desired labels and separate them carefully from the
sheet using the perforations provided.
Slip the label card into the slot on one side next to the button
to be labeled then. Bow the label card upward slightly to push
it through to the opposite side in the slot. The label card should
now lay flat on the lighting sheet. Repeat this procedure for all
other label cards.
When finished, replace the keypad cover on the remote control
again and lock it in place using the slider switch in the battery
compartment.
Insert the batteries again and close the battery compartment.
If no suitable label exists on the card provided, use the sheet of
unprinted labels. These labels can be printed with a standard
printer.
Templates can be downloaded under www.HomeMatic.com.
31