Mounting/Adjusting The Hand Brake & Cable - R82 Panther User Manual

MOUNTING/
GB
ADJUSTING THE
HAND BRAKE
& CABLE
The handle is mounted on the push brace with
a screw driver (A). Lead the inner cable through
the hole in the screw (B) and mount the outer
cable (C).
To fasten the cable at the brake: Lead the cable
through the holder (D) and through the hole in
the screw (E). Fasten the nut with an 8 mm key.
Cut the cable and mount the cable and sleeve
(F) as shown.
A
31
B
C
D
E
F
G
B