Central Brake - R82 Panther User Manual

A
D
E
G
B
B
C

CENTRAL BRAKE

GB
To mount the central brake on the Panther frame,
the instruction below must be followed:
* Mount the fitting with the bar for the brake, on
the front of the frame (A) with the 4 enclosed
Allen screws.
* Make sure that the spring (B) is mounted
around the fitting. Turn around the bar for the
brake, serveral times, to fasten the spring.
* Mount the bar for the pedal with the enclosed
screw (C).
* Pull the bar (D) for the pedal up against the
crossbar on the frame. Place the pedal (E)
on the frame and mark the two holes. See to
that the bar for the pedal is vertical.
* Remove the pedal from the frame and drill
two holes ø6,5 in the frame. The holes must
be all through the bar.
* Mount the pedal on the frame and then, the
bar for the pedal with the enclosed screws.
* Adjust the fittings (A) to tighten the brake.
12