Mitel 5550 User Manual page 75

Must CANCEL before dialing
Press Cancel on the console keypad, and the try dialing again.
Must Press Retrieve Key then 1 - 6 or * to Retrieve
Held Call. Request Ignored.
Try again, but dial the position number of held call (1-6), or dial *
(to retrieve the longest held call).
Network
Shows if you have dialed over a MSDN/DPNSS (Digital Private
Network Signaling System) line, which connects 3300 ICPs in a
private network.
No Answer
There was no answer at the extension called.
No One on Hold at Specified Hold Position
Verify your position number and try again.
Not Ready
The data call cannot be completed at this time. Try again later.
Operator Absent
If you have changed the status of your console to Operator
Absent, this message is displayed in the DEST area of the console
of another attendant who calls you.
Out of Service
The device you dialed is not in service.
Overriding
Confirmation message when you override a busy party.
Page Zone Busy
The zone number you dialed is busy; dial another zone code, or
try again later.
Page Zone Unassigned
Verify the number you dialed. If it still doesn't work, contact your
communications department.
Press "Yes" to Confirm Request or "No" to Quit
Press the appropriate softkey.
Recall
A previously extended call has returned to your console after a
time-out period.
Recall – Busy
A previously extended call has returned to your console because
the extension is busy.
Recall - Busy, Camp-on Not Allowed
There is a restriction preventing you from camping a call on to
the requested destination.
Recall – No Answer
A previously extended call has returned to your console because
the extension did not answer.
Remove MSG Waiting for Station # :
Enter the number of the extension from which you wish to
remove a Message Waiting notification.
Request Denied
Verify what you've just done, and try again.
Ringing
The number you dialed is ringing.
Route
You are calling a route.
Reference 67