Auto-Answer; Using The Analog Line - Mitel 5360 User Manual

To return to Handsfree operation:
1. Press (SPEAKER).
2. Hang up the handset.

Auto-Answer

When the Auto-Answer feature is active, incoming calls ring briefly, and then the phone
answers the call in Handsfree mode. You can continue the call handsfree or use the handset.
To enable or disable Auto-Answer:

Press Auto-Answer key. (See
programming features on your phone.) The key is highlighted and all incoming calls are
answered in Handsfree mode.
To switch from Handsfree mode to handset mode:

Lift the handset
To end a call, do one of the following:

Press (CANCEL)

Press the Hang Up softkey.

Wait for the caller to hang up.

Using the Analog line

The phone can support the Line Interface Module. See
more information.
Programming Features on Your Keys
Using The Line Interface Module
- 41 -
5360 IP Phone – User Guide
for instructions on
for