Mitel 5360 User Manual page 99

There are two LEDs associated with the cordless headset:

A blue LED on the headset indicates the headset status

A green LED in the headset charging cradle indicates battery status
LED Color LED State
Blue Solid
(on headset)
Blinking
Winking
Solid for 2
seconds
Off
Green Solid
(on cradle)
Blinking
Winking
Off
Blinking: LED is On and Off for equal amount of time
Winking: LED is On for a short period of time and Off for a longer period
Headset microphone is muted
Headset is in pairing mode
Active audio path between Headset and Module
Pairing successful OR
New battery installed
No audio path between Headset and Module OR
Battery is dead
Battery is fully charged
Battery is charging. Note: It is normal for the headset LED to cycle
between blinking and solid as battery charge is maintained.
Indicates low voltage when headset is uncradled
When headset is cradled, indicates battery is not charging
- 89 -
5360 IP Phone – User Guide
Indicates