Play A Voice Message; Dial Message Sender - Mitel 5360 User Manual

5360 IP Phone – User Guide

Play a Voice Message

1. Open the Voice mail application.
2. Login to your mailbox.
3. Select a message in your message list.
4. Press Play.
Control the play of the message via the following command buttons:

Stop (

Pause (

rewind the message by five seconds (

fast forward the message by five seconds (Skip

go to the beginning of the message (

go to the end of the message (To end
Note: The audio connection is terminated after 30 seconds of idle time.

Dial Message Sender

To dial the phone number of a message sender:
1. Open the Voice mail application.
2. Login to your mailbox.
3. Do one of the following:

In the main window Message List, press the Dial
message.

Select a message in your message list to display the Message Details, and then
press Dial.
If there is no known number, the Dial
If the number is external, enter the required prefix digit (for example "9") to access an
outside line before pressing Dial. When dialing from the window Message List, the
number is dialed as displayed; no prefix entry is allowed.
Pressing Dial will display the Phone application if Open on Made Calls is enabled in the
Call Notification preferences in the Settings application.
)
)
- 26 -
Skip)
)
To start)
)
icon to the right of the
icon is disabled in the message list.