Calibrate The Display; Specify Audio Feedback Options - Mitel 5360 User Manual

5360 IP Phone – User Guide

Calibrate the Display

To calibrate the phone screen for touch accuracy:
1. Press the blue Applications key
2. Press Settings.
3. Press Calibrate Display.
4. Touch the center of each + to calibrate the display.

Specify Audio Feedback Options

The error beep volume in the phone is related to the volume of the speaker. You can set the
beep volume using this procedure; however, adjusting the speaker volume also affects the
beep volume.
To adjust the volume of the audio feedback:
1. Press the blue Applications key
2. Press Settings.
3. Press Audio Feedback.
4. Set the options using the appropriate actions described below:
Turn audio feedback off for errors
Turn button beep off
Adjust audio for error beeps or button beeps
Turn audio feedback on for errors
Turn button beep on
5. Click Save.
Note: Press Cancel at any time to exit this application without making any changes.
.
.
Option Action
Press
Red indicates it's been turned off.
Press or
Press to enable it.
- 14 -