Incoming/Outgoing Intercom With Auto-Answer And Barge In - Mitel 6800i Series Administrator's Manual

Mitel 6800i Series SIP Phone Release 4.0.0 SP1 Administrator Guide
Use the following procedure to configure LLDP-MED using the Mitel Web UI:
MITEL WEB UI
1. Click on Advanced Settings->Network->Advanced Network Settings.
2. The "LLDP" field is enabled by default. To disable LLDP, click the check mark in the box
to clear the check mark.
3. In the "LLDP Packet Interval" field, enter the time, in seconds, between the transmission
of LLDP Data Unit (LLDPDU) packets.
The value of zero (0) disables this parameter. Valid values are 0 to 2147483647. Default
is 30.
4. Click Save Settings to save your changes.
INCOMING/OUTGOING INTERCOM WITH AUTO-ANSWER AND
BARGE IN
The Intercom feature allows you to press the configured Intercom button on the IP phone and
then enter the number you want to call to initiate an intercom call. Intercom calls can be
controlled either locally (phone-side) or by the SIP server (server-side).
You can configure incoming and outgoing intercom calls on all phone models. A User can
configure incoming intercom calls only.
OUTGOING INTERCOM CALLS
On outgoing intercom calls, an available unused line is found when the Icom button is pressed.
Since this line has no configuration, the phone applies an existing configuration ("Outgoing
Intercom Settings", Line, default is Line 1) to this line in preparation for placing the intercom
call. For example, an outgoing intercom call can use the configuration of line 1 but places the
actual intercom call using line 9. Only an Administrator can configure outgoing intercom calls.
A phone-side Intercom call indicates the phone is responsible for telling the recipient that an
intercom call is being placed, while a server-side intercom call means the SIP server is
5-92