Introduction; Symbols And Abbreviations; General; Manufacturer's Liability - DeDietrich GT 430 Installation And Service Manual

1 Introduction

1.1 Symbols and abbreviations

Caution danger
Risk of injury and damage to equipment. Attention must be
paid to the warnings on safety of persons and equipment.
Specific information
Information must be kept in mind to maintain comfort.

1.2 General

1.2.1

Manufacturer's liability

Our products are manufactured in compliance with the requirements
of the various applicable European Directives. They are therefore
delivered with marking and all relevant documentation.
In the interest of customers, we are continuously endeavouring to
make improvements in product quality. All the specifications stated in
this document are therefore subject to change without notice.
1.2.2

Installer's liability

The installer is responsible for the installation and inital start up of the
appliance. The installer must respect the following instructions:
Read and follow the instructions given in the manuals provided
with the appliance.
Carry out installation in compliance with the prevailing
legislation and standards.
Perform the initial start up and carry out any checks necessary.
Explain the installation to the user.
If a maintenance is necessary, warn the user of the obligation
to check the appliance and maintain it in good working order.
Give all the instruction manuals to the user.
05/03/2013 - 300011893-001-02
Reference
Refer to another manual or other pages in this instruction
manual.
DHW: Domestic hot water
Our liability as the manufacturer may not be invoked in the following
cases:
Failure to abide by the instructions on using the appliance.
Faulty or insufficient maintenance of the appliance.
Failure to abide by the instructions on installing the appliance.
GT 430
5