Technical Description; General Description; Composition Of The Range; S3 Standard Control Panel - DeDietrich GT 430 Installation And Service Manual

3 Technical description

3.1 General description

The boilers of the GT 430 range are pressurised hot water boilers
designed for connecting to a flue pipe which require a separate
automatic fuel-oil or gas burner. GT 430 boilers have the following
characteristics:

3.2 Composition of the range

3.2.1

- S3 Standard control panel

Standard panel to be fitted
Panel comprising the settings, control and safety devices allowing
the boiler to operate autonomously, without regulation.
3.2.2

K3 control panel

Separate panel
Panel comprising the settings, control and safety devices allowing
the boiler to operate autonomously.
Control panel K3 also allows the boiler to be used as a secondary
boiler for installations with 2 to 10 boilers in cascade, one of which is
fitted with a "DIEMATIC-m3" control panel.
8
- Heating body in cast iron.
- S3, B3, K3 or DIEMATIC-m3 control panel.
- Production of domestic hot water can be ensured by a separate hot
water calorifier.
The standard panel is used to connect the boiler to the boiler room
control cabinet.
This cabinet can be fitted with control units.
Side panel
A version of the K3 control panel with lateral attachment is also
available.
GT 430 05/03/2013 - 300011893-001-02