Shooting With Prerecord Cs - Casio EX-100F User Manual

Shooting with Prerecord CS

Half-pressing and holding the shutter button causes a pre-record buffer to be
continually updated with images. When the shutter button is fully pressed, buffer
contents are recorded along with a series of real-time images. Use Prerecord CS
when you want to make sure you do not miss fast-moving action.
Shutter button
half-press
Pre-recorded images
1.
Align the mode dial with [P] (Program Auto).
2.
Press [MENU].
3.
Press [4], use [8] and [2] to select the " r REC MENU" tab, and then
press [6].
4.
Use [8] and [2] to select "CS", and then press [SET].
5.
Use [8] and [2] to select "High Speed CS" and then press [SET].
This will cause the recording mode icon on the screen to become
6.
Press [SET].
7.
Use [8] and [2] to select the
option and then press [SET].
8.
Use [8] and [2] to select the continuous shutter (CS) speed you want
and then press [4].
• Use a higher "High Speed CS fps" setting when shooting a fast-moving subject.
9.
Use [8] and [2] to select the
option and then press [SET].
10.
Use [8] and [2] to select the maximum number of shots and then
press [4].
Shutter button
full-press
Recorded images (up to 30 images)
Continuous recording of images until shutter
(High Speed CS fps) Control Panel
(Maximum CS Shots) Control Panel
71
button released
Shutter button
release
.
Snapshot Tutorial