Formatting Built-In Memory Or A Memory Card; Resetting The Camera To Factory Defaults; Checking The Current Camera Firmware Version - Casio EX-100F User Manual

Formatting Built-in Memory or a Memory Card (Format)
Procedure
[MENU] * "
If a memory card is loaded in the camera, this operation will format the memory card.
It will format built-in memory if no memory card is loaded.
• The format operation will delete all contents on the memory card or in built-in
memory. It cannot be undone. Make sure you do not need any data currently on
the card or in built-in memory before you format it.
• Formatting built-in memory will delete the following data.
– Protected images
– "Custom Shot" setups
• Formatting a memory card will delete the following data.
– Protected images
• Formatting will cause all images to be deleted, even if file deletion is disabled
("Disabled" selected for "Delete Key" (page 196)) for some images.
• Check the battery level before starting a format operation and make sure it is not
too low. Formatting may not be performed correctly and the camera may stop
operating normally if the camera powers down while formatting is in progress.
• Never open the battery cover while formatting is in progress. Doing so can cause
the camera to stop operating normally.
Resetting the Camera to Factory Defaults (Reset)
Procedure
[MENU] * "
See page 219 for details about the camera's factory default settings.
The settings below are not reset.
World Time settings, clock settings, date style, screen language
Checking the Current Camera Firmware Version (Version)
Procedure
[MENU] * "
Selecting this menu item displays the camera model name, the version of firmware
installed on the camera, and the camera's MAC address.
• Note that the MAC address is fixed number that functions as the camera's network
device identifier.
• Check this screen after updating the camera's firmware to confirm that updating
was actually performed.
SETTING" Tab * Format
SETTING" Tab * Reset
SETTING" Tab * Version
201
Other Settings (SETTING)