Table of Contents
Advertisement
8.
Use [8] and [2] to select the
option and then press [SET].
9.
Use [8] and [2] to select the maximum number of shots and then
press [SET].
10.
Press the shutter button the rest of the way and hold it down.
Shooting of images will continue as long as you depress the shutter button or until
the maximum number of images specified by "High Speed CS fps" is reached.
. Shooting with Prerecord CS
Half-pressing and holding the shutter button causes a pre-record buffer to be
continually updated with images. When the shutter button is fully pressed, buffer
contents are recorded along with a series of real-time images. Use Prerecord CS
when you want to make sure you do not miss fast-moving action.
Shutter button
half-press
Pre-recorded images
1.
Align the mode dial with [b] (BEST SHOT).
2.
Press [SET].
3.
Use [8] and [2] to select
4.
Select "High Speed CS" and then press [SET].
5.
Press [SET].
6.
Use [8] and [2] to select the
option and then press [SET].
7.
Use [8] and [2] to select the continuous shutter (CS) speed you want
and then press [4].
• Use a higher "High Speed CS fps" setting when shooting a fast-moving subject.
(Maximum CS Shots) Control Panel
Shutter button
full-press
Recorded images (up to 30 images)
Continuous recording of images until shutter
, and then press [SET].
(High Speed CS (fps)) Control Panel
92
button released
Shutter button
release
Using BEST SHOT
Advertisement
Table of Contents
