Table of Contents
Advertisement
*1
The control dial operates as described below in the M (Manual Exposure)
recording mode.
• When a function other than "Aperture" is assigned to the function ring (page
45), rotating the control dial adjusts aperture.
• When "Aperture" is assigned to the function ring, rotating the dial adjusts
shutter speed.
*2
When performing the operations below, the functions assigned to the left and right
keys are fixed and are not affected by the functions you assign to them with Key
Customize "L/R Key".
• When "MF" is selected as the focus mode, the left and right keys perform focus
adjustment.
• When "I Multi" is selected as the AF area setting, the left and right keys shift
the focus area.
NOTE
• Assigning functions to the up/down keys disables their normal [8] (DISP) function
(which changes the monitor screen contents) and [2] (
changes the flash setting).
• The same function cannot be assigned to multiple controllers (keys, control dial).
• Depending on the recording mode, some functions may not be assignable to the
Control Dial.
Using the Self-timer (Self-timer)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * Self-timer
For details, see the Control Panel procedure on page 46.
Reducing Light Intensity (ND Filter)
Procedure
Enter the REC Mode * [MENU] * " r REC MENU" Tab * ND Filter
Selecting "On" for this setting reduces light intensity, which can affect color saturation,
which makes it possible to shoot at lower shutter speeds under bright outdoor
lighting. The icon
will appear on the monitor screen.
118
) function (which
Advanced Settings (REC MENU)
Advertisement
Table of Contents
