Casio EX-100F User Manual page 67

NOTE
• The monitor screen is blank while a time lapse operation is in progress. The
camera's back lamp will be lit to indicate that recording is in progress. Performing a
camera operation while the monitor screen is blank will cause screen contents to
appear. Note, however, that changing the mode dial setting will cause the Interval
Shot operation to stop.
• If the " Interval" setting is one minute or greater, the camera's lens will retract
and the back lamp will go out between shots. Pressing [ON/OFF] (Power) while an
Interval Shot operation is in progress will cause a message to appear.
The camera's battery can be charged over a USB connection while the lens is
retracted during Interval Shot. If you want the battery to be charged during Interval
Shot, set up the USB connection before starting the recording operation.
Connecting the USB cable while the lens is extended will cause camera power to
turn off.
• The "Auto Flash" and "Red Eye Reduction" flash settings are not supported while a
setting other than "Auto" is selected for the "Aperture" or "Shutter Speed" setting
while using Interval Shot. Selecting Interval Shot while an unsupported flash setting
is in effect will cause the flash mode setting to change automatically to "Flash Off".
• The functions below cannot be used with this function.
Remote Capture, CS, Motion Shutter, Anti-shake Functions, Zoom (SR),
Continuous AF, EX Finder, Type 4 Review setting, Digital Zoom
• Pressing the shutter button while the camera is standing by between Interval Shot
shots will cancel the Interval Shot operation and display the message "Interval
recording was canceled."
• The Auto Power Off is disabled while shooting with this function (page 195).
67
Snapshot Tutorial