Table of Contents
Advertisement
Using Snapshots to Create a Movie (Make Movie)
Procedure
[p] (PLAY) * [MENU] * "p PLAY MENU" Tab * Make Movie
You can use the procedure below to convert snapshots shot with this camera to a
movie. Selecting a group will include all of the images in the group in one movie. You
can use up to 1,000 snapshots in a movie.
1.
Use [8], [2], [4], and [6] to move the blue boundary to a snapshot
you want to include in the movie and then press [SET].
This will select the check box in the lower left corner of the image and move the
blue boundary to the next image.
• To clear (deselect) a check box, move the blue boundary to the applicable
image and then press [SET].
• Selecting a group and pressing [SET] will select all of the images in the group
for inclusion in the movie.
• To view a particular image, rotate the zoom controller.
2.
Repeat step 1 to select other images you want to include in the movie.
After you are finished selecting images, press [MENU].
3.
Use [8] and [2] to select the playback speed and then press [SET].
This creates a movie using the selected snapshots.
NOTE
• RAW images cannot be included in a movie.
• Movie image quality depends on the size of the snapshots.
3M and greater: FHD
2M or 1M: HD
0.8M or VGA: STD
Other Playback Functions (PLAY MENU)
155
Advertisement
Table of Contents
