Casio EX-100F User Manual page 226

Problem
Other
The wrong date
and time are
displayed, or the
wrong date and
time are being
stored along with
image data.
The messages on
the display are in
the wrong
language.
Images cannot be
transferred over a
USB connection.
Language selection
screen appears
when the camera is
turned on.
There are various
indicators and
values on the
monitor screen.
Possible Cause and Recommended Action
The date and time setting is off. Set the correct date and time
(page 198).
The wrong display language is selected. Change the display
language setting (page 199).
1)The USB cable may not be connected securely. Check all
connections.
2)If the camera is not turned on, turn it on.
3)Your computer may not be able to recognize the camera if
you connect via a USB hub. Always connect directly to the
computer's USB port.
4)USB communication may not be possible when the battery
level indicator is
1)You did not configure initial settings after purchasing the
camera or the camera may have been left with a dead
battery. Configure the correct settings (pages 27, 199).
2)There may be a problem with the camera's memory data. If
this is the case, perform the reset operation to initialize the
camera's setup (page 201). After that, configure each setting.
If the language selection screen does not re-appear when you
turn the camera on, it means that the camera's memory
management data has been restored.
If the same message appears after you turn power back on,
contact your retailer or a CASIO authorized service center.
The monitor screen shows indicators and other information
about shooting conditions and the image you are recording. You
can use [8] (DISP) to select what information you want to
include on the display (page 13).
226
. Charge the battery before connecting.
Appendix