Creating And Using Your Own Setups - Casio EX-100F User Manual

Creating and Using Your Own Setups (Custom Shot)
You can register up to 12 setups, based on snapshots shot with the camera, as
Custom Shot scenes. Selecting a registered Custom Shot scene configures the
camera with its settings.
. To register a Custom Shot scene
1.
Align the mode dial with [C] (Custom Shot).
2.
Press [SET].
• A message will appear if there are no Custom Shot scenes currently
registered. If there is one or more images that are supported for Custom Shot
scene registration, press [SET] to advance to step 5, below. Otherwise
proceed with step 3.
3.
Use [8] and [2] to select
4.
Use [8], [2], [4], and [6] to select "Custom Shot" (New Scene), and
then press [SET].
5.
Use [8], [2], [4], and [6] to select a snapshot.
6.
Use [8] and [2] to select "Save" and then press [SET].
NOTE
• Custom Shot setup registration is not supported for images shot with the functions
below. Custom Shot setup registration is also not supported for movies.
Premium Auto Pro, Multi SR Zoom, Snapshot In Movie
• You can register the setup of a single image that is part of a CS group. Note,
however, that the resulting Custom Shot scene will be for a snapshot, not a CS
Mode operation.
• You can check the settings of the currently selected Custom Shot scene by
displaying the camera's setting menus and looking at its settings.
• Custom Shot scenes are assigned numbers in the sequence: U1, U2, U3, and so
on.
• The settings and functions below are not registered as part of a Custom Shot
scene.
Motion Shutter, Motion Position, Image Size, Image Quality, ISO High Limit, Digital
Zoom, MF Position, Self-timer, aperture, Some of the settings when shooting with
Intelligent Bracketing
• Custom Shot scenes are stored in built-in memory in the SCENE folder
(snapshots) (page 189).
• Formatting the camera's built-in memory (page 201) deletes all the Custom Shot
scene files.
• If the "User Set Up" setting is assigned to the front shutter button, you can register
the setup of the currently displayed snapshot as a Custom Shot scene simply by
displaying it and then pressing the front shutter button.
(Custom Scene) and then press [SET].

80
Snapshot Tutorial