Using Motion Shutter To Trigger A Self-Timer Operation - Casio EX-TR10 User Manual

Using Motion Shutter to Trigger a Self-timer Operation

(Motion Shutter)
With Motion Shutter the camera automatically triggers
a self-timer countdown whenever it detects subject
movement within an icon you specify on the monitor
screen. This means you can control operation of the
self-timer from a distance by waving your hand, so you
can include yourself in the image being shot.
1.
In the REC mode, touch the recording mode
icon (page 38).
2.
Touch " " (Motion Shutter).
l
3.
Drag the start self-timer icon "
location in the image where you want movement to be detected.
• Keep the two icons separate from each other. Whenever you move an icon to a
location where it overlaps the other icon, the other icon will move out of the way
automatically.
4.
When everything is ready, press the shutter button all the way down.
The start self-timer icon will change to "
standby for shooting.
5.
Facing the camera, move your hand or perform some other movement
in the area of the start self-timer icon you positioned in step 3.
When the camera detects subject movement within the icon, it will automatically
start a self-timer countdown. The camera will shoot an image when the
countdown reaches zero, and then go back into Motion Shutter standby to wait
for the next trigger movement.
NOTE
• The trigger time of the Motion Shutter self-timer is fixed at two seconds.
• The preview icon "
When the camera detects movement within the preview icon, it will display the
image that was shot for three seconds.
• Motion Shutter exits standby automatically after it shoots six images.
• To cancel Motion Shutter standby at any time, press the shutter button or touch the
monitor screen.
• Motion Shutter may not operate properly when there is little difference in the color
of the subject and the color of the background enclosed by the boundary, or when
the subject is located far away from the camera, making it too small.
" and preview icon "
" will appear on the monitor screen when a snapshot is shot.
42
" to indicate that the camera is in
" to the
Recording Images