Magnifying Part Of The Video (Viewer Ptz) - Canon VB-S30D Operating Manual

Note
• In the Admin Viewer, you can also control the zoom with the
Camera Control button (p. 141).
• If [Digital Zoom] is set to [Enable] in [Camera] on the Setting
page, the icon for the digital zoom telephoto end is displayed.
(p. 48).
• Zoom refers to digital zoom only.
Change the Zoom Ratio in the Panorama
Display Area
1 Click the [Panorama Display] button.
Change the zoom ratio in the panorama display area
2
displayed.
You can change the zoom ratio by dragging the yellow
frame lines in the panorama window and changing the
size of the frame. The zoom ratio will adjust to capture
the area in the changed frame.
Note
Zoom refers to digital zoom only.
134
Maximum telephoto
digital zoom
(only when digital zoom is
on)
Maximum telephoto
Slider for zoom
Move the knob upwards to
zoom in (telephoto)
Move the knob downwards
to zoom out (wide-angle)
Maximum Wide Angle
Using the Preset/Home Position
You can control the camera using presets and home
position registered in the camera beforehand (p. 96).
Click the preset selection box and select a preset from the
displayed list to go to the selected preset camera angle.
Click the [Home Position] button to move the camera
angle to the home position.
Preset selection box
Note
Register presets and home position beforehand using the Preset
Setting Tool (p. 98). Registered presets will appear in the preset
selection box.
Compensating Backlight
This control is effective when the video is dark due to
backlight.
Clicking [BLC] brightens video that is dark due to
backlight.
Clicking the button again cancels backlight
compensation.
Important
• The [BLC] button is not available if [Smart Shade Control] is
set to [Auto].
• The [BLC] button is not available if [Exposure] is set to
[Manual].

Magnifying Part of the Video (Viewer PTZ)

You can use the Viewer PTZ panel to magnify part of the
camera's video in the video display area.
[Home Position] button