Installing A Memory Card - Lexmark E260 Series User Manual

Installing a memory card

CAUTION—SHOCK HAZARD: If you are installing internal options, memory cards, flash memory, or a firmware
card after setting up the printer, turn the printer off and unplug it from the wall outlet before continuing. If you
have other devices attached to the printer, then turn them off as well and unplug any cables going to the printer.
Warning—Potential Damage: System board electronic components are easily damaged by static electricity. Touch
something metal on the printer before touching any system board electronic components or connectors.
An optional memory card can be purchased separately and attached to the system board. To install the memory
card:
1
Access the system board.
2
Unpack the memory card.
Note: Avoid touching the connection points along the edge of the card.
3
Align the memory card with its connector on the system board. Push the latches on the connector open if they
are not open already.
Additional printer setup
16