Additional Printer Setup; Selecting A Location For The Printer - Lexmark E260 Series User Manual

Additional printer setup

Selecting a location for the printer

When selecting a location for the printer, leave enough room to open trays, covers, and doors. If you plan to install
any options, leave enough room for them also. It is important to:
•
Make sure airflow in the room meets the latest revision of the ASHRAE 62 standard.
•
Provide a flat, sturdy, and stable surface.
•
Keep the printer:
–
Away from the direct airflow of air conditioners, heaters, or ventilators
–
Free from direct sunlight, humidity extremes, or temperature fluctuations
–
Clean, dry, and free of dust
•
Allow the following recommended amount of space around the printer for proper ventilation:
1 Rear 300 mm (12.0 in.)
2 Front 300 mm (12.0 in.)
3 Right side 200 mm (8.0 in.)
4 Left side 12.7 mm (0.5 in.)
5 Top 300 mm (12.0 in.)
Additional printer setup
14