Using The Standard Exit Bin And Paper Stop; Paper Capacities - Lexmark E260 Series User Manual

3
Feed paper into the manual feeder only to the point where its leading edge can contact the paper guides.
4
Adjust the paper guides to the paper width.
Warning—Potential Damage: Do not force the paper into the feeder. Forcing the paper causes jams.

Using the standard exit bin and paper stop

The standard exit bin holds up to 150 sheets of 20 lb paper. It collects print jobs facedown. The standard exit bin
includes a paper stop that keeps paper from sliding out the front of the bin as it stacks. The paper stop also aids in
neater stacking of the paper.
To open the paper stop, pull it so it flips forward.
Notes:
•
Do not leave the paper stop in the open position if you are printing on transparencies. Doing so may cause
creases in the transparencies.
•
When moving the printer to another location, make sure the paper stop is closed.

Paper capacities

The capacities of the trays and the manual feeder are based on 75 g/m
Load up to
Tray 1
250 sheets of paper
150 sheets of A6-size paper
50 paper labels
50 transparencies
Notes
Note: Vinyl, pharmacy, or dual-sided labels are not supported. Use
paper labels only.
Loading paper and specialty media
47
2
(20 lb) paper.